<del id="kgmwq"></del> <del id="kgmwq"></del> 
Ultra-Pure Stainless Steel & Nickel Alloy Steel board
Production size (thickness * width * length)：
board：δ0.5～80×450~2500*Lmm
strip：δ0.05～3×450*Lmm
Material
1).Ultra-Pure Stainless Steel AISI 316L
Principal Component Ratio(mass%)
(*ppm)
|
Material |
C |
Mn |
S |
Ni |
Cr |
Mo |
N* |
O* |
|
JISG4303 SUS316L |
≤0.030 |
≤2.00 |
≤0.030 |
12.00-15.00 |
16.00-18.00 |
2.00-3.00 |
-- |
-- |
|
HN316L-Ⅰ |
0.006 |
0.02 |
0.001 |
14.83 |
16.74 |
2.27 |
65 |
5 |
|
HN316L-Ⅱ |
0.007 |
0.23 |
0.001 |
14.66 |
16.91 |
2.23 |
80 |
7 |
|
HN316L-Ⅲ |
0.012 |
0.45 |
0.004 |
12.15 |
16.85 |
2.03 |
160 |
49 |
|
HN316L-Ⅳ |
0.013 |
1.84 |
0.004 |
12.11 |
16.83 |
2.02 |
270 |
62 |
Applications: semiconductor manufacturing equipment,ultra high vacuum valve, joint,filter Housings,etc.
Key Technology: Special smelting is used to reduce "non-metallic inclusion & gas composition " in the production of materials .
Nonmetallic Inclusions：
|
Material |
ASTM-D（Worst Thin） |
|||||
|
0.5 1.0 1.5 2.0 2.5 (級) |
||||||
|
HN316L-Ⅰ |
|
|
|
|
|
|
|
HN316L-Ⅱ |
|
|
|
|
|
|
|
HN316L-Ⅲ |
|
|
|
|
|
|
|
HN316L-Ⅳ |
|
|
|
|
|
|
2）Nickel-cobalt alloy, elastic alloy,Elgiloy/ UNS R30003/ W.Nr 2.4711
|
material |
C |
Si |
Mn |
S |
P |
Ni |
Cr |
Mo |
Co |
Be |
|
Elgiloy |
≤0.15 |
≤1.20 |
1.5~2.5 |
≤0.015 |
≤0.015 |
14.0~16.0 |
19.0~21.0 |
6.0~8.0 |
39~41 |
≤0.10 |
Elgiloy is a non-magnetic cobalt-chromium-nickel-molybdenum alloy with a unique combination of very high strength while maintaining excellent formability, excellent corrosion resistance and high fatigue strength. Additional strength increases of up to 25% can be achieved by aging cold return raw materials. Elgiloy's strong resistance to sulphide stress corrosion cracking makes it the alloy of choice in the most demanding acid well environments. In seawater, Elgiloy is virtually immune to cracking, stress corrosion and point corrosion, even at the highest strength levels. Elgiloy can operate in a wide temperature range: from low temperatures -184 ° C to 454 ° C。
Applications include: springs, seals, semiconductor components, orthodontics, medical devices, surgical implants, satellite communications equipment, and weapon systems.
Industries supplied include: oil and gas extraction, medical, dental, aerospace, defense, space exploration and watchmaking.
Elgiloy Maximum tensile strength can be reached2600Mpa，density：8.3 g/cm3
3).Nickel Alloy:
UNS N02200/ UNS N02201
|
Material |
Ni |
Cu |
Mo |
Fe |
Mn |
C |
Si |
S |
|
UNS N02200 |
≥99.0 |
≤0.25 |
-- |
≤0.40 |
≤0.35 |
≤0.15 |
≤0.35 |
≤0.01 |
|
UNS N02201 |
≥99.0 |
≤0.25 |
-- |
≤0.40 |
≤0.35 |
≤0.02 |
≤0.35 |
≤0.01 |
Material Behavior :
High plasticity over a wide temperature range,and it is similar steel strength of medium carbon steel in annealing state. UNS N02200 / UNS N02201 can resist corrosion in neutral to moderate reduction environment & use in alkaline, high temperature halogen and salt environments.
UNS N04400 / Monel 400
|
Material |
Ni |
Cu |
Mo |
Fe |
Mn |
C |
Si |
S |
|
UNS N0440 |
≥63.0 |
≤28.0-34.0 |
-- |
≤2.5 |
≤2.0 |
≤0.3 |
≤0.5 |
≤0.024 |
Material Behavior :
Monel400,it is good for anti-corrosion of hydrofluoric acid,fluorine gas medium,strong alkali. It also can resistant corrosion of organic compound, such as neutral solution, water, sea water and atmosphere.
The very import characteristics of Monel400 is impossible to occur stress corrosion cracks ,generally and with a good cutting performance.
UNS N05500 / Monel K500
|
Material |
Ni |
Cu |
Al |
Ti |
Fe |
Mn |
S |
c |
Si |
|
UNS N05500 |
≥63.0 |
27.0-33.0 |
2.30-3.15 |
0.35-0.85 |
≤2.0 |
≤1.5 |
≤0.01 |
≤0.25 |
≤0.5 |
Material Behavior:
Monel K500 is a nickel-copper alloy, it combines the excellent corrosion resistance of Monel 400 with greater strength and hardness.Yield strength of Monel K500 is 3 times of Monel 400. High strength and good corrosion resistance have been widely used in well detection equipment and electronic components, because Monel K500 with Low magnetic conductivity.
UNS N06600 / Inconel 600
|
Material |
Ni |
Cu |
Mo |
Fe |
Mn |
C |
Si |
S |
Cr |
|
UNS N06600 |
≥72.0 |
≤0.5 |
-- |
6.0-10.0 |
≤1.0 |
≤0.15 |
≤0.5 |
≤0.015 |
14.0-17.0 |
Material Behavior:
With better anti-corrosion & oxidation in high temperature, excellent cold & hot processing and welding performance. Under700℃, Inconel600 is heat resistance and high plasticity.It can be welded according to ERW & penetration welding or hard-solder.
UNS N08825 / Incoloy 825
|
Material |
Ni |
Cu |
Mo |
Fe |
Mn |
C |
Si |
S |
Cr |
Al |
Ti |
|
UNS N08825 |
38.0-46.0 |
1.5-3.0 |
2.5-3.5 |
≥22.0 |
≤1.0 |
≤0.05 |
≤0.5 |
≤0.03 |
19.5-23.5 |
≤0.2 |
0.6-1.2 |
Material Behavior:
Inconel 825 steel is kind of stabilized austenitic "Ni, Fe, Cr" alloy material with titanium element, and it is also included "Cu & Mo ". It is an universal engineering alloy material to be used in aeroengine parts, jet engines, aerospace structural parts, chemical equipment and other related products, because Incoloy 825 is good to resistant acid and alkali corrosion in both oxidizing and reducing environments.
UNS N07718 / Incoloy718
|
Material |
Ni |
Cr |
Fe |
Mo |
Nb |
P |
Mn |
Si |
S |
Cu |
Al |
Ti |
B |
|
UNS N07718 |
50.0-56.0 |
17-21 |
Rest |
2.8-3.3 |
4.75-5.50 |
≤0.08 |
≤0.35 |
≤0.35 |
≤0.015 |
≤0.30 |
0.20-0.80 |
0.65-1.15 |
≤0.006 |
Material Behavior:
Inconel718 is kind of structure for austenite materials, formed by precipitation and hardening "γ" with excellent mechanical properties. During heat treatment,Inconel718 will generate "δ" at the grain boundary for the best plasticity.
Hastelloy Hastelloy B1 , Hastelloy B2 , Hastelloy B3 , Hastelloy C276, Hastelloy C22,
Hastelloy C4.
|
Material |
Ni |
Mo |
Fe |
Mn |
C |
Si |
S |
Cr |
Ti |
P |
V |
Co |
W |
|
UNS N10001 |
Rest |
26.0-30.0 |
4.0-6.0 |
≤1.0 |
≤005 |
≤1.0 |
≤0.03 |
≤1.0 |
-- |
≤0.040 |
0.2-0.4 |
≤2.5 |
/ |
|
UNS N10665 |
Rest |
26.0-30.0 |
2.0-7.0 |
≤1.0 |
≤0.02 |
≤0.10 |
≤0.03 |
≤1.0 |
-- |
≤0.040 |
/ |
≤1.0 |
/ |
|
UNS N10276 |
Rest |
15.0-17.0 |
4.0-7.0 |
≤1.0 |
≤0.010 |
≤0.08 |
≤0.03 |
14.5-16.5 |
-- |
≤0.040 |
≤0.35 |
≤2.5 |
3.0-4.5 |
|
UNS N06022 |
Rest |
12.5-14.5 |
2.0-6.0 |
≤0.5 |
≤0.015 |
≤0.08 |
≤0.02 |
20.0-22.5 |
-- |
≤0.020 |
≤0.35 |
≤2.5 |
2.5-3.5 |
|
UNS N06455 |
Rest |
14.0-17.0 |
≤3.0 |
≤1.0 |
≤0.015 |
≤0.08 |
≤0.03 |
14.0-18.0 |
≤0.70 |
≤0.040 |
/ |
≤2.0 |
/ |
Add: Building C, No. 888, west huanhu second road, nanhui new town, pudong new area, Shanghai Tel:15821616610
<del id="kewau"></del>